Honda Accord

1998-1999 of release

Repair and car operation

Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
- Brake system
   System of anti-blocking of brakes (ABS) - the general information and codes of malfunctions
   Replacement of brake shoes of disk brake mechanisms
   Removal and installation of supports of disk brake mechanisms
   Condition check, removal and installation of a brake disk
   Replacement of boots of drum-type brake mechanisms of back wheels
   Removal and installation of wheel cylinders
   Removal and installation of the main brake cylinder
   Check of a condition and replacement of brake lines and hoses
   Pumping of brake system
   Check of serviceability of functioning/tightness, removal and installation of assembly of the vacuum amplifier of brakes
   Adjustment of the parking brake
   Cable replacement (ов) drive of the parking brake
   Check of serviceability of functioning, replacement and adjustment of the sensor switch of stoplights
   Check of serviceability of functioning and replacement of the sensor switch of level of brake liquid
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes

d42fda4b d42fda4b

Adjustment of the parking brake


1. Remove control lever facing by the parking brake (see. Head Body).
2. Remove the central console (see. Head Body).
3. Prop up protivootkatny boots forward wheels, then поддомкратьте a back of the car and establish it on props. On one click cock the lever of the parking brake.

4. Manually rotating back wheels of the car, tighten clockwise an adjusting nut on assembly of the equalizer of a hummock drive of the parking brake. Stop a nut tightening as soon as wheels will start to "be taken".

5. Release the lever of the parking brake and make sure that back wheels rotate freely. At the correct adjustment of a drive the course of a control lever of the parking brake should correspond to the value stipulated in Specifications to Head of Control and routine maintenance of the real Management.
6. Lower the car on the earth, then establish into place the central console (see. Head Body).