|
1. Disconnect a negative wire from the battery.
|
|
If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action! |
2. Take from an impellent compartment the storage battery and the pallet of its fastening (see. Section Check of a condition and battery replacement).
3. Disconnect from an assembly bracket of a starter the bottom hose of a radiator and burn down electroconductings. On V6 engines near a place of fastening of a starter pass lines of a path of cooling of ATF, - track, that they were shifted aside.
|
|
4. Carefully mark and disconnect electroconducting from plugs of the traction relay of a starter. Release intermediate clamps of fastening of electroconducting. |
|
|
5. Give fixing bolts and remove a starter. |
6. Installation is made upside-down. |
