Honda Accord

1998-1999 of release

Repair and car operation

Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
- Power supply system and release
   Sbrasyvaniye of pressure in a power supply system
   Check of serviceability of functioning of the fuel pump, measurement of pressure of fuel
   Check of a condition and replacement of fuel lines
   Removal and installation of the fuel pump
   Check of a condition and sensor replacement
   Removal and installation of a fuel tank
   Cleaning and repair of a fuel tank - general information
   Removal and installation of assembly of an air purifier
   Removal, installation and adjustment of a cable of an accelerator
   System of electronic injection of fuel (EFI) - the general information
   Check of serviceability of functioning of system of injection
   Removal and installation of the case of a throttle
   Removal and installation of a regulator of pressure of fuel
   Removal and installation of the fuel highway and fuel injectors
   Release system - the general information
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes

d42fda4b d42fda4b

Check of serviceability of functioning of system of injection


See preventions at the beginning of pressure Sbrasyvaniye's Section in a power supply system.

1. Check reliability of fastening of electric connections, especially plugs of grounding of a chain of system of injection. Attentively examine all systems concerning functioning electric sockets. Violation of quality of electric contacts involves a set of problems and of more than a half of engine failures is at the bottom.
2. Check level of a charge of the battery. Accuracy of management of structure of an air and fuel mix to a great extent depends on serviceability of functioning of RSM and the information sensors, defined, including, and level of tension of their food.
3. Check a condition of a filtering element of an air purifier, - even partial violation of passableness of the air filter makes essential impact on profitability of fuel consumption and efficiency of return of the engine (see. Head of Control and routine maintenance).
4. Check serviceability of functioning of the fuel pump (see. Section Check of serviceability of functioning of the fuel pump, measurement of pressure of fuel). If the safety lock of the pump fused, replace it new. If the new safety lock also fails at once, check chain electroconducting on existence of signs of short circuit (see. Head Onboard electric equipment).
5. Check a condition of the vacuum hoses connected to the inlet pipeline.
6. Disconnect an air sleeve from the case of a throttle and check the last on existence of a nagaroobrazovaniye and other deposits (in particular on sites near a butterfly valve). In case of identification of signs of pollution of the case of a throttle, address to materials of Head Engine management and make diagnostics of malfunctions of PCV and EGR systems. At strong pollution the case of a throttle is subject to replacement.

Walls of the throttle chamber, a butterfly valve and its axis on considered models of cars are covered with a protective film which it is not necessary to try to remove in order to avoid casual damage of components.

7. At the working engine serially hear by means of a stethoscope to each of injection injectors, - the uniform poshchelkivaniye testifies to serviceability of functioning of an injector. In the absence of near at hand stethoscope, use a long screw-driver, simply pressing a tip of her sting to the case of an injector and being guided by vibrations transferred on the handle.

8. At identification of violations of functioning of an injector it is necessary to use a special lamp sampler for diagnostics of injectors (ask in shops of automobile accessories). The lamp is connected to the electric socket of a suspected injector. Start the engine and check by means of a lamp all injectors. The uniform blinking of a lamp confirms serviceability of functioning of an injector. Otherwise the car should be driven away on car repair shop for more detailed diagnostics.

9. Muffle the engine, disunite electric sockets of injectors and measure electric resistance of each of them. Compare results of measurements to requirements of Specifications. In case of need replace the failed knot.

10. Additional information on diagnostics of a condition of system of injection contains in Head Engine management.