1998-1999 of release
Repair and car operation
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Four-cylinder engines
+ V6 Engines
- General and major maintenance of the engine
Check of pressure of oil
Check of kompressionny pressure in cylinders
Diagnostics of a condition of the engine with use of the vacuum gage
Removal of the power unit from the car - preparation and precautionary measures
Removal and engine installation
Alternative versions of schemes of regenerative repair of the engine
Order of dismantling of the engine by its preparation for major maintenance
Dismantling of a head of cylinders
Cleaning and check of a condition of a head of cylinders
Service of valves
Assembly of a head of cylinders
Removal and check of a condition of balancing shaft (4-cylinder engines)
Removal of shatunno-piston assemblies
Removal of a cranked shaft
Cleaning of the block of the engine
Check of a condition of the block of the engine
Honingovaniye of mirrors of cylinders
Check of a condition of components of shatunno-piston group
Check of a condition of a cranked shaft
Check of a condition and selection of loose leaves of radical and shatunny bearings of a cranked shaft
Engine assembly order
Installation of piston rings
Installation of a cranked shaft and check of working gaps of radical bearings
Installation of a back epiploon of a cranked shaft
Installation of shatunno-piston assemblies and check of size of working gaps in shatunny bearings of a cranked shaft
Installation of balancing shaft (four-cylinder engines)
Trial start and engine running in after major maintenance
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Onboard electric equipment
+ electric equipment Schemes
Alternative versions of schemes of regenerative repair of the engineDuring independent performance of major maintenance of the engine the reader will face the need of a choice of the scheme of actions defining total amount and nature of the forthcoming work most acceptable for it. Need of replacement of the block of the engine, shatunno-piston groups and a cranked shaft is defined by a set of various factors the main thing from which is the block condition. To number of the other parameters defining a choice of structure of the forthcoming works, temporary and material inputs, existence of necessary spare parts, and also own qualification of the owner of the car, as mechanics belong.
It is possible to allocate the following main schemes of carrying out major maintenance of the engine:
Repair and replacement of components - If the condition of the block and the main internal components of the engine in the course of survey is found in an individual order the satisfactory, most reasonable decision there will be a carrying out their service in an individual order. Thus it is necessary to check carefully a condition of the block, a cranked shaft and shatunno-piston groups. Even at very insignificant degree of wear of the block, a mirror of its cylinders without fail are subject to a honingovaniye.
Use ремкомплекта a cranked shaft - the Set consists their pierced cranked shaft and a set of repair rods with the pistons established on them. Also piston rings and loose leaves of bearings are applied. The set can be intended for installation as in the block with cylinders of the standard size, and in the pierced assembly.
Use of the reduced set of the block of the engine - the Reduced set includes the block of cylinders with already established in it cranked shaft and shatunno-piston groups. Thus all bearings of a cranked shaft are completed with new loose leaves, and their working gaps are precisely adjusted. Further such set is equipped additionally with the camshafts removed from the old engine, components of the klapanny mechanism, a head of cylinders and hinged units without any global mechanical works.
Use of an expanded set of the block of the engine - the Expanded set represents the reduced set, plus the oil pump, the case pallet, a head of cylinders with a cover, a camshaft, components of the klapanny mechanism and GRM drive (cogwheels with a gas-distributing belt) with covers. All provided bearings, epiploons and laying are new, gaps are adjusted. It is necessary to connect only to the block the inlet pipeline with a final collector and hinged units.
The option of replacement of the engine assembled is possible also. Many firm service centers offer similar service on exchange base changing the become unfit for use units on new or restored.
Before stopping the choice on any of the listed schemes of performance of major maintenance of the engine and to start acquisition of the corresponding replaceable components, consult with specialists of car-care center, representatives firm service center of the company manufacturer of your car and more skilled motorists.