Honda Accord

1998-1999 of release

Repair and car operation

Honda Chord
+ Honda Accord brand Cars
- Settings and routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of liquid of the power steering
   Check of level of ATF AT
   Replacement of impellent oil and oil filter
   Check of a condition and replacement of brushes of screen wipers
   Check, service and charging of the storage battery
   Condition check, adjustment of effort of a tension and replacement of driving belts
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition of components of system of cooling
   Rotation of wheels
   Check of brake system
   Check of a condition of seat belts
   Replacement of a filtering element of an air purifier
   Check of a condition of components of a power supply system
   Check of level of the RKPP transmission oil
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases
   Check of a condition and replacement of spark plugs
   Check of a condition and replacement of VV of candle wires, covers and distributor begunka
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Check and adjustment of turns of idling
   Service of system of cooling (oporozhneniye, washing and filling)
   Replacement of brake liquid
   Replacement of liquid of automatic transmission (AT/CVT)
   RKPP transmission oil replacement
   Replacement of filters of central air of air
   Check and adjustment of gaps of valves (necessarily)
   Sbrasyvaniye of the indicator of intervals of routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes

d42fda4b d42fda4b

Replacement of liquid of automatic transmission (AT/CVT)

(each 48 000 km [30 000 miles] run or times in 24 months)


1. Replacement of ATF should be made on a regular basis, according to the schedule of routine maintenance of the car.
2. Prepare fresh transmission liquid of the corresponding grade.
3. Number of other necessary tools and materials treat: props for car fixing in the lifted situation, a ratchet drive on 3/8 inches (with the extension piece) to a face key, drain capacity in volume not less than 5 l and a stock of rags and/or old newspapers.
4. Liquid should merge previously being heated-up to normal working temperature during a short trip. Hot ATF possesses higher fluidity and better washes away шлам and other deposits.

The working temperature of ATF can reach 180°С! Be careful, work in rubber gloves.

5. Having made a short trip and ATF warming up to normal working temperature, park the car on an equal horizontal platform with a firm covering, поддомкратьте it and establish on props, having provided a free access to a drain stopper of a case of transmission.
6. Bring under a transmission case drain capacity and all necessary stock. Try not to touch to located under with the car bottom to the warmed-up components of the power unit and system of production of the fulfilled gases.

7. Having placed properly reception container, turn out a drain stopper (on 4-cylinder engines it is located on the right below on AT case, on V6 engines - at the left below). The reversing of a stopper is carried out by means of a ratchet drive and the extension piece. Do not forget that during the first moment of ATF will start to follow with a relative pressure which, in process of decrease of level of liquid, will gradually decrease, - be ready to correct in time as appropriate the provision of drain capacity. When the liquid effluence completely will stop, wipe a drain stopper, screw it on the regular place and strongly tighten.

8. Lower the car on the earth.
9. Without starting the engine, take from a transmission case measuring щуп (4-cylinder engines) or turn out a jellied bolt with ATF mark, - on V6 engines). Through the released opening fill in necessary amount of fresh liquid of a demanded grade (see. Specifications). For the purpose of minimization of losses of ATF use a funnel. Fill in liquid in the small portions, periodically checking its level on щупу (see. Section Check of level of ATF AT). Do pauses, allowing the filled-in liquid to flow down on a pallet bottom.
10. Establish into place measuring щуп / screw a jellied bolt.
11. Start the engine, then slowly carry out the selector lever through all provisions, having finished in the situation "R" then cock the parking brake.
12. Muffle the engine and check ATF level. In case of need make the corresponding adjustment (level of liquid should be approximately in the middle of the site of an edge covered with notches щупа).