Honda Accord

1998-1999 of release

Repair and car operation

Honda Chord
+ Honda Accord brand Cars
- Settings and routine maintenance
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Check of level of liquid of the power steering
   Check of level of ATF AT
   Replacement of impellent oil and oil filter
   Check of a condition and replacement of brushes of screen wipers
   Check, service and charging of the storage battery
   Condition check, adjustment of effort of a tension and replacement of driving belts
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition of components of system of cooling
   Rotation of wheels
   Check of brake system
   Check of a condition of seat belts
   Replacement of a filtering element of an air purifier
   Check of a condition of components of a power supply system
   Check of level of the RKPP transmission oil
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases
   Check of a condition and replacement of spark plugs
   Check of a condition and replacement of VV of candle wires, covers and distributor begunka
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Check and adjustment of turns of idling
   Service of system of cooling (oporozhneniye, washing and filling)
   Replacement of brake liquid
   Replacement of liquid of automatic transmission (AT/CVT)
   RKPP transmission oil replacement
   Replacement of filters of central air of air
   Check and adjustment of gaps of valves (necessarily)
   Sbrasyvaniye of the indicator of intervals of routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes

d42fda4b d42fda4b

Service of system of cooling (oporozhneniye, washing and filling)

(each 48 000 km [30 000 miles] run or times in 24 months)

Do not allow antifreeze hit on open sites of a body and the painted surfaces of the car. Casual splashes immediately wash away a plentiful quantity of water. Remember that antifreeze is extremely toxic liquid and its hit in an organism even in small amounts is fraught with the most serious consequences (up to a lethal outcome). Never leave antifreeze being stored in leaky closed container and immediately collect cooling liquid spilled on a floor. Remember that the sweetish smell of antifreeze can draw to itself attention of children and animals. About ways utilization of the fulfilled cooling liquid consult with local authorities. In many regions of the world special points on different reception of working off are equipped. At all do not merge old cooling liquid in the sewerage and on the earth!

Recently nontoxical grades of antifreeze were developed, however they also demand care in the address.

Regularly, according to the schedule of routine maintenance of the car, the system of cooling should be emptied, washed out and filled with a fresh mix of antifreeze with water. Such service allows to prevent corrosion development in an okhladitelny path and considerably increases efficiency of functioning of system.

During service also the condition of all hoses of system and a cover of a jellied mouth of a radiator (without fail should be checked see. Section Check of a condition of components of system of cooling). Defective components are subject to replacement.

Do not forget about precautionary measures which should be observed at service of system of cooling (see the prevention at the beginning of the Section).



1. Cock the parking brake and prop up wheels protivootkatny boots. It is necessary to start direct performance of procedures of service after complete cooling of the engine, i.e. not less than several hours later after trip end.

2. Having waited final cooling of the engine, remove covers from a mouth of a radiator and a broad tank.

3. For production of cooling liquid from a radiator remove a drain stopper in its lower part. If the stopper "became attached", or is not provided not, disconnect from a radiator the bottom hose and merge liquid through it.

Cooling liquid should be lowered in drain capacity of the corresponding volume which it is necessary to prepare in advance. Try not to allow antifreeze hits in eyes and on open sites of skin.

4. On termination of an effluence of cooling liquid from a radiator remove the bottom hose of the last and merge the liquid remains from the top part of the block of the engine.
5. While liquid merges from the block, disconnect a hose from a broad tank and remove the last (see. Head of System of cooling, heating). Wash out a tank pure water (in case of need - with soap). Clear urovnevy labels on tank walls.
6. Check a condition of radiatorny hoses and hoses of system of heating, and also collars of their fastening on unions and branch pipes (in case of need see. Section Check of a condition of components of system of cooling).
7. Replace the damaged components (in case of need see. Head of System of cooling, heating).



1. On termination of an oporozhneniye of system remove from the engine the thermostat, take it from a casing and establish the last back on the regular place (empty). Now the system is ready to washing.
2. Establish into place the bottom hose of a radiator and tighten a drain stopper of the last. Transfer the handle of management of system of heating of salon to the maximum heating to provide also washing of the heat exchanger of a heater.

3. Disconnect the top hose from a radiator and insert into a branch pipe of the last a garden hose. Include water supply and continue washing until the pure transparent stream will not start to follow from the top hose.

4. In cases of especially strong pollution or violation of passableness of a radiator, remove the last (see. The head of System of cooling, heating) also deliver it for regenerative repair and service in a car-care center workshop.
5. Products of corrosion and dense deposits are removed from a path of system of cooling by chemical processing, - follow instructions of manufacturers of the cleaner acquired by you.

At regular performance of procedures of washing of system and replacement of cooling liquid need for carrying out chemical processing of a path should not arise.



1. Establish into place the thermostat and a broad tank, connect to a radiator all hoses.
2. Transfer the handle of management of system of heating of salon to the maximum heating.
3. Slowly fill in in a radiator fresh, made in demanded proportions (see. Specifications) an antifreeze mix with water. Continue filling until level of liquid will not rise to the bottom cut of a jellied mouth. Add cooling liquid in a broad tank, having finished its level to FULL COLD mark. Wait five minutes and once again check level of cooling liquid in a radiator, in case of need make adjustment.
4. Without establishing on a radiator a cover, start the engine and warm up it before opening of the valve of the thermostat (liquid should start to circulate through a radiator, thus there will be a warming up of the top hose of the last).
5. Muffle the engine and let's to it cool down. Add in a radiator a little more liquid, having finished its level to the bottom cut of a jellied mouth.
6. By a szhimaniye of the top hose of a radiator let out from it air, in case of need add a little more cooling liquid. Establish into place a radiator cover.
7. Transfer handles of a choice of temperature of submitted air and a choice of a high-speed mode of the fan to the maximum productivity.
8. Start the engine, warm up it to normal working temperature and check system on existence of signs of leaks.