1998-1999 of release
Repair and car operation
- Honda Accord brand cars
Identification numbers of the car
Acquisition of spare parts
Technology of service, tool and workplace equipment
Poddomkrachivaniye and towage
Security system of an audio equipment
Engine start from the auxiliary power supply
Automobile himikaliya, oils and greasings
Diagnostics of malfunctions of knots and car systems
+ Governing bodies and operation receptions
+ Settings and routine maintenance
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Onboard electric equipment
+ electric equipment Schemes
Poddomkrachivaniye and towagePoddomkrachivaniye
For a poddomkrachivaniye the car should be parked on an equal horizontal surface, whenever possible with a firm covering. In the presence of the slightest bias it is necessary will take care of precautionary measures against kickback: prop up located on a diagonal from a subject to removal a wheel protivootkatny boots, firmly cock the parking brake. Try not to depart far from the poddomkrachenny car, especially if nearby there are children.
Before поддомкрачивать the car, remove a decorative cap and a ballonny key weaken nuts of fastening of a wheel subject to replacement. Prepare запаску.
Take care of reliability of gearing of a head of a jack in a ledge of an edge of rigidity of a threshold. Rotating the jack handle, lift the car so that the wheel subject to replacement came off the earth. Having thrown off fixing nuts, remove a wheel and establish on its place spare. Screw wheel nuts, then lower the car on the earth, clean a jack and hold on nuts of fastening of a wheel in a diagonal order with demanded effort. Establish into place a cap. Combine and clean the tool. Do not forget to take and clean protivootkatny boots.
At carrying out more serious, than replacement of a wheel of repair work under the car, besides a jack, special props are usually got. Props can be established under actually domkratny points of thresholds with making of the same whetstone with a groove, or under any of bearing elements of the bottom as it is possible closer to domkratny points of thresholds.
Do not perform any repair works under the car fixed in lifted situation by means of only one jack! Surely use reliable props!
Strictly speaking, the car should be towed with the driving (forward) wheels torn off from the earth (best of all in general on a wrecker platform). If it is necessary to make car towage without a separation of forward wheels, turn the ignition key in the situation OFF, in order to avoid damage of the lock of blocking of a wheel.
The cars equipped with AT, can be towed by a forward course on all four wheels with the speed which is not exceeding 55 km/h (35 miles/h) and on distance no more than 80 km (50 miles). Before the beginning of towage check level of transmission liquid (see. Head of Control and routine maintenance). If ATF does not reach level of a mark of NOTES on an edge measuring щупа, it is necessary to make necessary adjustment, or to tow the car only with the forward wheels torn off from the earth. Make the following preparatory procedures:
a) Release the parking brake;
b) Start the engine;
c) Transfer the selector lever to the situation D4, then - in neutral (N);
d) Muffle the engine;
e) Turn the ignition key in the situation OFF (at all do not leave it in the situation LOCK).
If there is a need for towage of the car equipped with RKPP or AT of variatorny type (CVT) without a separation of wheels from the earth, do not forget to transfer a control lever to neutral transfer and to release the parking brake.