Honda Accord

1998-1999 of release

Repair and car operation

Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
- Gear shifting box
   + 5-step manual box of gear shifting (RKPP)
   - 4-step automatic transmission (AT)
      Problem diagnostics AT/CVT - the general information
      Removal, installation and adjustment of a cable of gear shifting
      Removal and installation of the lever of switching (selector) of transfers
      Blocking system - the general information, condition check, replacement and adjustment of an electromagnet of management
      Adjustment and replacement of the sensor switch of provision of transmission
      Check and replacement of electromagnetic valves of management with transmission functioning
      Removal and installation of 4-step and automatic transmission (AT)
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes

d42fda4b d42fda4b

Removal and installation of the lever of switching (selector) of transfers

Models of cars considered in the real Management are equipped with system of additional safety (SRS). Before starting performance of any works near the block of a safety cushion, a steering column or the dashboard, disconnect SRS in order to avoid receiving traumas at its casual operation (see. Head Onboard electric equipment). Electroconducting of a chain of SRS is easy for distinguishing on yellow color of isolation.


1. Remove the central console (see. Head Body).
2. Disconnect from lever assembly a cable of a drive of switching (see. Section Removal, installation and adjustment of a cable of gear shifting).
3. Turn out fixing screws and remove from the lever the plastic handle (all two screws - from each of the handle parties are provided).
4. Remove the display panel of provision of transmission.
5. Disconnect a control lamp [sensor switch] of provision of transmission.
6. Disconnect the electromagnetic valve of blocking of switching.

7. Turn out four screws of fastening of an assembly bracket of the basis of the lever and remove assembly.

8. Installation is made upside-down.