Honda Accord

1998-1999 of release

Repair and car operation

Honda Chord
+ Honda Accord brand Cars
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Engine management
- Gear shifting box
   - 5-step manual box of gear shifting (RKPP)
      Replacement of epiploons of power shafts
      Removal and installation of a drive and gear shifting lever
      Check and replacement of the sensor switch of fires of a backing
      Removal and RKPP installation
      Major maintenance of RKPP - the general information
   + 4-step automatic transmission (AT)
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes

d42fda4b d42fda4b

Replacement of epiploons of power shafts


1. Leakages of transmission oil appear connected with wear or mechanical damage of epiploons of power shafts more often. Replacement of epiploons is made rather simply and does not demand removal of transmission from the car.
2. Epiploons are located from both parties of a case of a transmission in introduction places in them power shafts. To Poddomkratta the car also establish it on props. A sign of leakage of oil through an epiploon are begin to flow on walls of a case of RKPP directly under power shafts.
3. Remove a power shaft (ы) (see. Head Coupling and power shafts).

4. By means of mount or a big screw-driver with a flat sting take an old epiploon from the landing nest in a transmission case

5. If to take an epiploon mount or a screw-driver it is not possible, it is necessary to use a special stripper (ask in shops of automobile accessories).

6. Having used as an opravka a face head of the corresponding size or a piece of a pipe of suitable diameter, plant a new epiploon on the regular place. Track, that the epiploon appeared is planted in a nest strictly perpendicularly and on full depth. Grease epiploon sponges with transmission oil.

Opravka should rest only against the firm external region of a face surface of an epiploon.

7. Establish into place a power shaft (ы), - try not to damage sponges of a new epiploon (ов).